Vault
Tokens
What are tokens
Tokens are the core method for authenticate and validate Vault clients; therefore, nearly all requests to Vault must be accompanied by a token. Vault clients authenticate with Vault using a configured auth method (Okta, Kubernetes, etc.). Upon successful authentication, Vault generates a token managed by the token backend and returns it to the client.
![Client authentication workflow](/_next/image?url=https%3A%2F%2Fcontent.hashicorp.com%2Fapi%2Fassets%3Fproduct%3Dtutorials%26version%3Dmain%26asset%3Dpublic%252Fimg%252Fvault%252Fdiagram_client_auth.png%26width%3D934%26height%3D240&w=1920&q=75)
The token auth method is built-in and is at the core of client authentication. A client can authenticate with Vault through the token auth method. For example, a Vault admin logs in with Vault via token auth method using the initial root token (or admin token if you are running HCP Vault Dedicated) so that the admin can configure other auth methods.
![Authenticate with token auth](/_next/image?url=https%3A%2F%2Fcontent.hashicorp.com%2Fapi%2Fassets%3Fproduct%3Dtutorials%26version%3Dmain%26asset%3Dpublic%252Fimg%252Fvault%252Fdiagram_token_auth.png%26width%3D1073%26height%3D191&w=3840&q=75)
Note
It is generally considered a best practice not to persist root tokens. Use the root token only for just enough initial setup. Once you enabled an auth method with appropriate policies allowing Vault admins to log in and perform operational tasks, the admins should use the auth method to authenticate instead of using the root token.
Token types
There are two types of Vault tokens: service token and batch token. Vault persists the service tokens in its storage backend. You can renew a service token or revoke it as necessary. On the other hand, Vault does not persist the batch tokens. Batch tokens are encrypted binary large objects (blobs) that carry enough information to perform Vault actions. Therefore, batch tokens are extremely lightweight and scalable; however, they lack most of the flexibility and features of service tokens.
In addition, there is a recovery token which is a special token used when Vault is running in recovery mode. To learn more, read the Operate Vault in Recovery Mode tutorial.
Token prefix
Tokens have a prefix that indicates their type. As of Vault 1.10, the token format has changed. The following table lists the prefix differences.
Token Type | Vault 1.9.x or earlier | Vault 1.10 and later |
---|---|---|
Service tokens | s. | hvs. |
Batch tokens | b. | hvb. |
Recovery tokens | r. | hvr. |
When you upgrade your existing Vault cluster to Vault 1.10 or later, the tokens generated prior to Vault 1.10 will still work if they have not expired.
This tutorial focuses on the service tokens. Read the batch tokens tutorial to learn the usage of batch tokens.
Service token lifecycle
Every non-root token has a time-to-live (TTL). When a token expires, Vault automatically revokes it. If you create a new token, the token you used to create the token becomes the parent token. Once the parent token expires, so do all its children regardless of their own TTLs.
Suppose a hierarchy exists with respective TTL as follows:
hvs.b519c6aa... (1h)
|___ hvs.6a2cf3e7... (4h)
|___ hvs.1d3fd4b2... (2h)
|___ hvs.794b6f2f... (3h)
In this scenario, the token hvs.1d3fd4b2..
will expire in two hours. Although
its child token (hvs.794b6f2f...
) has TTL of three hours, Vault will revoke
the child token when its parent expires.
When the top-level token (hvs.b519c6aa...
) expires, Vault will revoke all
tokens under the tree (hvs.6a2cf3e7...
, hvs.1d3fd4b2...
, and
hvs.794b6f2f...
) regardless of their TTL.
TTL and max TTL
If the token is renewable, you can use vault token renew
command to extend the
token's TTL before it expires. You can repeatedly renew a token until it reaches
its maximum TTL.
For example, if a token's TTL is 30 minutes and the maximum TTL is 24 hours, you can renew the token before reaching the 30 minutes. You can renew the token multiple times if you are using it. However, once the token reaches the 24 hours of its first creation, you can no longer renew the token.
Important
If you do not explicitly set the token's TTL or maximum TTL, it takes the system max TTL which is 32 days by default. (You can change the system default in the Vault server configuration file.) This means that Vault stores the token in its storage backend for 32 days even if you are not using it.
What you are going to learn
This tutorial explores the lifecycle of service tokens.
- Token with use limit: Tokens that are only good to invoke a specific number of operations.
- Periodic service tokens: Tokens that can be renewed indefinitely.
- Short-lived tokens: Tokens that are valid for a short time to avoid keeping unused tokens.
- Orphan tokens: Tokens that are root of their own token tree.
- Token role: Create a role which defines a set of policies and token lifecycle specification.
- Renew service tokens: Renew a token's TTL before it expires.
- Revoke service tokens: Revoke a token before its expiration.
- Apply token types: Configure an auth method so that it generates a token with specified lifecycle.
Prerequisites
To perform the tasks described in this tutorial, you need to have a Vault environment.
Launch Terminal
This tutorial includes a free interactive command-line lab that lets you follow along on actual cloud infrastructure.
Lab setup
Open a terminal and start a Vault dev server with
root
as the root token.$ vault server -dev -dev-root-token-id root
The Vault dev server defaults to running at
127.0.0.1:8200
. The server is initialized and unsealed.Insecure operation
Do not run a Vault dev server in production. This approach starts a Vault server with an in-memory database and runs in an insecure way.
Export an environment variable for the
vault
CLI to address the Vault server.$ export VAULT_ADDR=http://127.0.0.1:8200
Export an environment variable for the
vault
CLI to authenticate with the Vault server.$ export VAULT_TOKEN=root
Note
For these tasks, you can use Vault's root token. However, it is recommended that root tokens are only used for enough initial setup or in emergencies. As a best practice, use an authentication method or token that meets the policy requirements.
The Vault server is ready.
Tokens with use limit
In addition to TTL and max TTL, you can set the number of uses for tokens. The tokens with a use limit expire at the end of their last use regardless of their remaining TTLs. On the same note, use limit tokens expire at the end of their TTLs regardless of their remaining uses.
To create tokens with a use limit, set the number of uses when you create them.
To view optional parameters to create tokens, run the command with
-help
flag.$ vault token create -help Usage: vault token create [options] Creates a new token that can be used for authentication. This token will be created as a child of the currently authenticated token. The generated token will inherit all policies and permissions of the currently authenticated token unless you explicitly define a subset list policies to assign to the token. A ttl can also be associated with the token. If a ttl is not associated with the token, then it cannot be renewed. If a ttl is associated with the token, it will expire after that amount of time unless it is renewed. Metadata associated with the token (specified with "-metadata") is written to the audit log when the token is used. If a role is specified, the role may override parameters specified here.
There are a number of parameters you can set.
Create a token with a TTL of 1 hour and a use limit of 2. Attach the
default
policy.$ vault token create -ttl=1h -use-limit=2 -policy=default Key Value --- ----- token hvs.CAESIJRM-T1q5lEjIWux1Tjx-VGqAYJdd4FZtbp1wpD5Ym9pGh4KHGh2cy5TSjRndGoxaU44NzNscm5MSlRLQXZ0ZGg token_accessor GMAlk9ZNLGOCuTrOEIAooJG3 token_duration 1h token_renewable true token_policies ["default"] identity_policies [] policies ["default"]
Verification
Store the generated token in an environment variable,
USE_LIMIT_TOKEN
.Example:
$ export USE_LIMIT_TOKEN="hvs.CAESIJRM-T1q5lEjIWux1Tjx-VGqAYJdd4FZtbp1wpD5Ym9pGh4KHGh2cy5TSjRndGoxaU44NzNscm5MSlRLQXZ0ZGg"
Set the
VAULT_TOKEN
value to the token you just generated, and invoke any CLI command.$ VAULT_TOKEN=$USE_LIMIT_TOKEN vault token lookup
Example output:
Key Value --- ----- accessor GMAlk9ZNLGOCuTrOEIAooJG3 creation_time 1646691009 creation_ttl 1h display_name token entity_id n/a expire_time 2022-03-07T15:10:09.115115-08:00 explicit_max_ttl 0s id hvs.CAESIJRM-T1q5lEjIWux1Tjx-VGqAYJdd4FZtbp1wpD5Ym9pGh4KHGh2cy5TSjRndGoxaU44NzNscm5MSlRLQXZ0ZGg issue_time 2022-03-07T14:10:09.115118-08:00 meta <nil> num_uses 1 orphan false path auth/token/create policies [default] renewable true ttl 58m14s type service
Notice that the
num_uses
is now1
.Run another CLI command using the token.
$ VAULT_TOKEN=$USE_LIMIT_TOKEN vault write cubbyhole/token value=1234567890 Success! Data written to: cubbyhole/token
Try to read the value now using the same token.
$ VAULT_TOKEN=$USE_LIMIT_TOKEN vault read cubbyhole/token Error reading cubbyhole/token: Error making API request. URL: GET http://127.0.0.1:8200/v1/cubbyhole/token Code: 403. Errors: permission denied
The first command read the token's properties and then wrote a value to the cubbyhole secrets engine. This exhausted the use limit of 2 for this token. Therefore, the attempt to read the secret from the cubbyhole failed.
Periodic service tokens
Root or sudo users have the ability to generate periodic tokens. Periodic tokens have a TTL (validity period), but no max TTL; therefore, they may live for an infinite duration of time so long as they are renewed within their TTL. This is useful for long-running services that cannot handle regenerating a token.
Note
When you set period
, it becomes the token renewal period (TTL).
When a period and an explicit max TTL were both set on a token, it behaves as a
periodic token. However, once the explicit max TTL is reached, the token will be
revoked. Refer to the renew service tokens to learn
more about the period and the maximum TTL.
Create a token with 24 hours period.
$ vault token create -policy="default" -period=24h Key Value --- ----- token hvs.CAESIIG_PILmULFYOsEyWHxkZ2mF2a8VPKNLE8eHqd4autYGGh4KHGh2cy5aeTY0NFNSaUp3ZnpWbDF1RUNjUkNTZEg token_accessor kfhjoayUCHo1yjdbT0YWvlJ1 token_duration 24h token_renewable true token_policies ["default"] identity_policies [] policies ["default"]
Generate a periodic token again and store the token value in a
periodic_token.txt
file.$ vault token create -policy="default" -period=24h -format=json \ | jq -r ".auth.client_token" > periodic_token.txt
Display the generated token's metadata.
$ vault token lookup $(cat periodic_token.txt)
Example output:
Key Value --- ----- accessor kfhjoayUCHo1yjdbT0YWvlJ1 creation_time 1646692678 creation_ttl 24h display_name token entity_id n/a expire_time 2022-03-08T14:37:58.619594-08:00 explicit_max_ttl 0s id hvs.CAESIIG_PILmULFYOsEyWHxkZ2mF2a8VPKNLE8eHqd4autYGGh4KHGh2cy5aeTY0NFNSaUp3ZnpWbDF1RUNjUkNTZEg issue_time 2022-03-07T14:37:58.619605-08:00 meta <nil> num_uses 0 orphan false path auth/token/create period 24h policies [default] renewable true ttl 23h58m20s type service
You can renew the generated token indefinitely for as long as it does not expire. If you do not renew, the token expires after 24 hours.
Token Renewal
Jump to the Renew service tokens section to learn how to renew the generated token.
Short-lived tokens
Create a new service token with a TTL of 60 seconds which means that the token gets automatically revoked after 60 seconds.
Create a token with a TTL of 60 seconds, and store the generated token value in a
short-lived_token.txt
file.$ vault token create -ttl=60s -format=json \ | jq -r ".auth.client_token" > short-lived_token.txt
Lookup the generated token's metadata.
$ vault token lookup $(cat short-lived_token.txt)
Example output:
Key Value --- ----- accessor 2jiF5migalnLOmlMkeFNhMCl creation_time 1646694149 creation_ttl 1m display_name token entity_id n/a expire_time 2022-03-07T15:03:29.91061-08:00 explicit_max_ttl 0s id hvs.Dq0oT4q4QrUiBagHlYCaPoWn issue_time 2022-03-07T15:02:29.910614-08:00 meta <nil> num_uses 0 orphan false path auth/token/create policies [root] renewable true ttl 38s type service
NOTE: The
vault token lookup
command returns the token's properties. In this example, it shows that this token has 38 more seconds before it expires.When you execute a Vault command using the new token immediately following its creation, it should work. Wait for 60 seconds and try again. It returns
Code: 403. Errors:
which indicates a forbidden API call due to expired token usage.
Orphan tokens
Orphan tokens are not children of their parent; therefore, orphan tokens do not expire when their parent does.
Orphan tokens still expire when their own max TTL is reached.
Root privilege
A user must use a root token or token with sudo
capability on the auth/token/create
endpoint to generate an orphan token via
CLI.
Generate an orphan token, and store the generated token value in a
orphan_token.txt
file.$ vault token create -orphan -format=json \ | jq -r ".auth.client_token" > orphan_token.txt
Lookup the generated token's metadata.
$ vault token lookup $(cat orphan_token.txt)
Example output:
Key Value --- ----- accessor KiN7wpFjSaAJQWWnoz2lwo0g creation_time 1646695005 creation_ttl 0s display_name token entity_id n/a expire_time <nil> explicit_max_ttl 0s id hvs.YUteYoajMNxJ3u4u8I3znXLe issue_time 2022-03-07T15:16:45.704173-08:00 meta <nil> num_uses 0 orphan true path auth/token/create policies [root] renewable false ttl 0s type service
Validation
The revoke service tokens section tests the lifecycle of orphan tokens.
Token role
Instead of passing a number of parameters, you can create a role with a set of parameter values set.
Create a token role named
zabbix
.$ vault write auth/token/roles/zabbix \ allowed_policies="policy1, policy2, policy3" \ orphan=true \ period=8h
Create a token for
zabbix
role.$ vault token create -role=zabbix
Example output:
Key Value --- ----- token hvs.CAESINGbJtl4chQaJ2fH0ftOsYwr5IGTimfAubxs_Fjxz_OSGh4KHGh2cy5GSjQzaVU5bjFTR1ZoaVhnSmVlSUZFbDE token_accessor vqKXT2A8SUltDgTD0vUPCDcz token_duration 8h token_renewable true token_policies ["default" "policy1" "policy2" "policy3"] identity_policies [] policies ["default" "policy1" "policy2" "policy3"]
The generated token is valid for 8 hours and it is renewable, and multiple policies are attached.
Renew service tokens
You can renew the service token's TTL as long as it has not expired.
Create a token and save its value in a file,
test_token.txt
.$ vault token create -ttl=45 -explicit-max-ttl=120 -policy=default -format=json \ | jq -r ".auth.client_token" > test_token.txt
The generated token has a TTL of 45 seconds, and max TTL of 2 minutes (120 seconds).
Renew the token's TTL before the token expires.
$ vault token renew $(cat test_token.txt)
Example output:
Key Value --- ----- token hvs.CAESIJhnPJRhqeKian6_ZOcyFW362xgUG9wGkC2f2YYDlxFoGh4KHGh2cy5lN0FGUEF6a0R6d2RmenRNVTNtSnJOQms token_accessor Pd0QJMV6NcRz3ZFZOecOQqIh token_duration 45s token_renewable true token_policies ["default"] identity_policies [] policies ["default"]
Renew and extend the token's TTL to 60 seconds.
$ vault token renew -increment=60 $(cat test_token.txt)
Example output:
Key Value --- ----- token hvs.CAESIJhnPJRhqeKian6_ZOcyFW362xgUG9wGkC2f2YYDlxFoGh4KHGh2cy5lN0FGUEF6a0R6d2RmenRNVTNtSnJOQms token_accessor Pd0QJMV6NcRz3ZFZOecOQqIh token_duration 1m token_renewable true token_policies ["default"] identity_policies [] policies ["default"]
Notice that the token TTL (
token_duration
) is now 1 minute instead of 45 seconds.
Because the explicit max TTL is set to 2 minutes, you will not be able to renew the token after 2 minutes.
As time passes, Vault returns a message such as TTL of "26s" exceeded the effective max_ttl of "10s"; TTL value is capped accordingly
to indicate that
the token TTL cannot exceed 2 minutes from its creation time. Eventually, the
token expires and Vault automatically revokes it. Once the token expires, the
renew command returns token not found
message.
Revoke service tokens
If a user or machine needs a temporal access to Vault, you can set a short TTL or a number of uses to a service token so the token is automatically revoked at the end of its life. But if any suspicious activity was detected, Vault has built-in support for revocation of service tokens before reaching its TTL.
You can revoke service tokens using the vault token revoke
command or the
auth/token/revoke
API endpoint.
In this section, you are going to create tokens with the following hierarchy and inspect the token lifecycle.
parent_token (1 minute)
|___ child_token (3 minutes)
|___ orphan_token (3 minutes)
Create a
test
policy.$ vault policy write test -<<EOF path "auth/token/create" { capabilities = ["create", "read", "update", "delete", "list", "sudo"] } EOF
If you are not familiar with policies, complete the policies tutorial.
Create a token and save its value in a file,
parent_token.txt
.$ vault token create -ttl=60 -policy=test -format=json \ | jq -r ".auth.client_token" > parent_token.txt
The generated token has a TTL of 1 minute (60 seconds).
Create a token using the parent token and save its value in a file,
child_token.txt
.$ VAULT_TOKEN=$(cat parent_token.txt) \ vault token create -ttl=180 -policy=default -format=json \ | jq -r ".auth.client_token" > child_token.txt
The generated token has a TTL of 3 minute (180 seconds) while its parent token's TTL is 1 minute.
Create an orphan token using the parent token and save its value in a file,
orphan_token.txt
.$ VAULT_TOKEN=$(cat parent_token.txt) \ vault token create -orphan -ttl=180 -policy=default -format=json \ | jq -r ".auth.client_token" > orphan_token.txt
The generated token is an orphan token with a TTL of 3 minute (180 seconds).
Revoke the parent token.
$ vault token revoke $(cat parent_token.txt) Success! Revoked token (if it existed)
Verify that the token no longer exists by looking it up.
$ vault token lookup $(cat parent_token.txt)
Vault returns an error message.
Error looking up token: Error making API request. URL: POST http://127.0.0.1:8200/v1/auth/token/lookup Code: 403. Errors: * bad token
Look up the child token.
$ vault token lookup $(cat child_token.txt)
Vault returns the
bad token
error because Vault revoked the child token along with its parent token.Look up the orphan token.
$ vault token lookup $(cat orphan_token.txt)
Because each orphan token is the root of its own token tree, it exists until it expires. Therefore, the command displays the detail information about the orphan token.
Tip
Instead of revoking using a token value, revoke tokens with a token accessor using the
-accessor
flag.
Apply token types
You learned how you can set the token's lifecycle. The next step is to apply this to generate tokens for your applications. Vault clients first authenticate with Vault using an auth method to acquire a token. There are auth methods aimed to authenticate applications or machines. Once its identity was verified, Vault server will return a token with appropriate policies attached.
Use the AppRole auth method to demonstrate this.
Enable the
approle
auth method.$ vault auth enable approle Success! Enabled approle auth method at: approle/
Create a role for your app specifying that the generated token type is periodic and expires after 24 hours if not renewed.
$ vault write auth/approle/role/jenkins policies="jenkins" period="24h" Success! Data written to: auth/approle/role/jenkins
This example defines a role named, "jenkins". The tokens generated for this role will be a periodic token with
jenkins
policy attached.
Verification
Note
If you are not familiar with the AppRole auth method, read the AppRole Pull Authentication tutorial.
Retrieve the RoleID for the
jenkins
role and save it in a file,role_id.txt
.$ vault read -format=json auth/approle/role/jenkins/role-id \ | jq -r ".data.role_id" > role_id.txt
Generate a SecretID for the
jenkins
role and save it in a file,secret_id.txt
.$ vault write -f -format=json auth/approle/role/jenkins/secret-id \ | jq -r ".data.secret_id" > secret_id.txt
Authenticate with Vault using the generated
role_id
andsecret_id
.$ vault write auth/approle/login role_id=$(cat role_id.txt) \ secret_id=$(cat secret_id.txt)
Example output:
Key Value --- ----- token hvs.CAESINkhQovozcMjgFICYH4JrRfr9wIVIoYMzPirvFRuKjigGh4KHGh2cy43TVhCaTY3c3dvNXliNjNnN1NPNWVyZjk token_accessor RaASz9meQMF1bO1h3plDqt18 token_duration 24h token_renewable true token_policies ["default" "jenkins"] identity_policies [] policies ["default" "jenkins"] token_meta_role_name jenkins
View the token details.
$ vault token lookup <returned_token>
Example:
$ vault token lookup hvs.CAESINkhQovozcMjgFICYH4JrRfr9wIVIoYMzPirvFRuKjigGh4KHGh2cy43TVhCaTY3c3dvNXliNjNnN1NPNWVyZjk Key Value --- ----- accessor RaASz9meQMF1bO1h3plDqt18 creation_time 1646696969 creation_ttl 24h display_name approle entity_id 99eb72ff-9c0f-986e-0197-ceee17848a78 expire_time 2022-03-08T15:49:29.196039-08:00 explicit_max_ttl 0s id hvs.CAESINkhQovozcMjgFICYH4JrRfr9wIVIoYMzPirvFRuKjigGh4KHGh2cy43TVhCaTY3c3dvNXliNjNnN1NPNWVyZjk issue_time 2022-03-07T15:49:29.196043-08:00 meta map[role_name:jenkins] num_uses 0 orphan true path auth/approle/login period 24h policies [default jenkins] renewable true ttl 23h58m31s type service
The output shows the
period
of 24 hours, and thejenkins
policy is attached.
Clean up
If you wish to clean up your environment after completing the tutorial, follow the steps in this section.
Unset the
VAULT_TOKEN
environment variable.$ unset VAULT_TOKEN
Unset the
VAULT_ADDR
environment variable.$ unset VAULT_ADDR
Delete the files used to test tokens.
$ rm *_token.txt role_id.txt secret_id.txt payload.json renew_payload.json
If you are running Vault locally in
-dev
mode, you can stop the Vault dev server by pressing Ctrl+C where the server is running. Or, execute the following command.$ pgrep -f vault | xargs kill
Next steps
This tutorial walked through the lifecycle of service tokens. You learned how to
generate a token using the vault token create
command or the
/auth/token/create
endpoint. Then, you learned how to apply the desired token
lifecycle when you configure an auth method in the Apply token
type section.
Integrating your application to read or write secrets to Vault may require:
- Authenticate with Vault using an auth method
- Maintain the token
- Renew or revoke the token if necessary
Vault Agent can help to simplify the introduction of Vault to your applications. The App Integration tutorials introduce different approaches.
But first, go through the Batch tokens tutorial to understand the difference between the service tokens and batch tokens so that you can decide which token type is best suited for your use case.